硅酸盐学报

成型压力对水泥基压电复合材料压电及介电性能的影响

作者：黄世峰胡雅莉常钧王守德程新

单位：济南大学材料科学与工程学院济南大学材料科学与工程学院济南大学材料科学与工程学院济南大学材料科学与工程学院济南大学材料科学与工程学院济南250022 济南250022 济南250022 济南250022 济南250022

分类号：TB332

出版年,卷(期):页码：2006,34(4):500-503

DOI：

摘要：

以硫铝酸盐水泥为基体,以铌锂锆钛酸铅为功能体,用压制成型法制备了水泥基压电复合材料。研究了不同成型压力对水泥基压电复合材料的压电性能及介电性能的影响规律。结果表明:随着成型压力的增大,复合材料的结构越致密,其压电应变常数d33和相对介电常数εr均增大;而机电耦合性能则变化较小。在40～100kHz频率范围内,成型压力越大,压电复合材料的介电常数随频率的升高而下降的程度就越显著,低频和高频时的介电常数之差也就越大。

Sulphoaluminate cement as matrix and niobium lithium zirconate titanate as functional part were used to fabricate ce-ment-based piezoelectric composites by compressing technique. The effects of the forming pressure on the piezoelectric and dielec-tric properties of the composites were investigated. The results show that the piezoelectric strain factor and relative permittivity in-crease with the increase of forming pressure, which is mainly due to the greater density of the microstructure of the composites at higher pressure, but the forming pressure has little effect on the electromechanical coupling coefficient. The higher the pressure is, the steeper the reduction rate of the dielectric constant with increasing frequency in the range of 40—100 kHz. And the difference in the dielectric constant at low and high frequencies is greater while forming at higher pressure.

基金项目：

国家自然科学基金(50272024);; 山东省优秀中青年科学家科研奖励基金(03BS060)资助项目。

作者简介：

参考文献：

[1]张东,吴科如,李宗津.0–3型水泥基压电机敏复合材料的制备和性能[J].硅酸盐学报,2002,30(2):161–166.ZHANG Dong,WU Keru,LI Zongjin.J Chin Ceram Soc(in Chinese),2002,30(2):161–166. [2]LI Zongjin,ZHANG Dong,WU Keru.Cement-based0–3piezoelec-tric composites[J].J Am Ceram Soc,2002,85(2):305–313. [3]黄世峰,常钧,程新,等.压电陶瓷/硫铝酸盐水泥基复合材料的压电性及介电性[J].硅酸盐学报,2004,32(9):1082–1087.HUANG Shifeng,CHANG Jun,CHENG Xin,et al.J Chin Ceram Soc(in Chinese),2004,32(9):1082–1087. [4]黄世峰,徐荣华,刘福田,等.水泥基功能复合材料研究进展及应用[J].硅酸盐通报,2003,21(4):58–63.HUANG Shifeng,XU Ronghua,LIU Futian,et al.Bull Chin Ceram Soc(in Chinese),2003,21(4):58–63. [5]HUANG Shifeng,CHANG Jun,CHENG Xin.Piezoelectric properties of0–3PMN/sulphoaluminate cement composites[J].Smart Mater Struct,2004,13:270–274. [6]HUANG Shifeng,CHANG Jun,CHENG Xin.Poling process and piezo-electric properties of lead zirconate titanate/sulphoaluminate cement composites[J].J Mater Sci,2004,39(23):6975–6979. [7]LEE Hyeung Gyu,KIM Ho Gi.Influence of microstructure on the dielectric and piezoelectric properties of lead zirconate tita-nate-polymer composites[J].J Am Ceram Soc,1989,72(2):938–942. [8]王君达,谈慕华,吴科如.无宏观缺陷水泥基复合材料的介电性能[J].同济大学学报,2000,28(2):168–171.WANG Junda,TAN Muhua,WU Keru.J Tongji University(in Chi-nese),2000,28(2):168–171. [9]ANSI/IEEE Std176–1987.IEEE standard on piezoelectricity[S].USA:American National Standard,1987.227–273.

服务与反馈：

【文章下载】【加入收藏】