首页期刊信息编委及顾问期刊发行联系方式使用帮助常见问题ENGLISH
位置:首页 >> 正文
 基于灰色系统理论的多孔镁橄榄石材料孔结构与导热性能的相关性
作者:宋云飞1 邓承继1 祝洪喜1 丁军1 余超1 樊国栋2 冷光辉2 
单位:1. 武汉科技大学 省部共建耐火材料与冶金国家重点实验室 武汉 430081  2. 河南东大高温节能材料有限公司 河南 鹤壁 458030 
关键词:灰色系统 气孔特性 导热性能 多孔材料 
分类号:TQ175.7
出版年,卷(期):页码:2018,46(3):449-449
DOI:
摘要:
用NaCl作熔盐介质制备镁橄榄石质多孔材料,研究了NaCl含量(质量分数)的不同以及烧结温度的变化对镁橄榄石多孔材料的性能的影响,并借助灰色系统理论研究了不同NaCl含量以及不同烧成温度下材料的气孔特性参数变化与导热系数值变化的关联性大小。结果表明:相同烧成温度、不同熔盐含量时,多孔材料的导热能力与材料内部气孔孔径在0.47~4.70 μm范围内的数量关联度最大;不同烧成温度、相同熔盐含量时,孔径分布在大于47 μm之间的气孔数量对多孔材料的导热能力关联度最大。
 
 

 

 Forsterite porous materials were prepared with NaCl as a molten salt medium. The influences of different NaCl contents (Mass fraction) and firing temperatures on the properties of forsterite porous materials were studied. And, the correlation between the pore characteristics and the thermal conductivity of the materials at different NaCl contents and firing temperatures was investigated based on the gray system theory. The results show that the grey relational degree between the thermal conductivity and the pore size distribution of 0.47–4.70 μm is greater than that between the thermal conductivity and the other pore size distributions when the samples are sintered at 1 150 ℃ at different NaCl contents. The correlation coefficient between the thermal conductivity and the pore size distribution of >47.0 μm is the maximum when the samples with the same content of NaCl are sintered at different temperatures.

 
 
 
基金项目:
国家自然科学基金(51574187)和国际合作项目(2015DFR50800)资助。
作者简介:
宋云飞(1992—),男,硕士研究生。
参考文献:

 [1] MIAO Z, LI N, YAN W. Effect of sintering temperature on the phase

composition and microstructure of anorthite–mullite–corundum porous
ceramics[J]. Ceram Int, 2014, 40(10): 15795–5799.
[2] 汪强兵, 汤慧萍, 杨保军, 等. 连续梯度金属多孔材料的研究[J].中
国材料进展, 2016, 35(2): 136–140.
WANG Bingqiang, TANG Huiping, YANG Baojun, et al. Chin Mater
(in Chinese), 2016, 35(2): 136–140.
[3] SANTOS W N D. Effect of moisture and porosity on the thermal
properties of a conventional refractory concrete[J]. J Eur Ceram Soc,
2003, 23(5): 745–755.
[4] WANG J, CARSON J K, NORTH M F, et al. A new approach to
modelling the effective thermal conductivity of heterogeneous
materials[J]. Int J Heat Mass Tran, 2006, 49(17): 3075–3083.
[5] SHIMIZU T, MATSUURA K, FURUE H, et al. Thermal conductivity
of high porosity alumina refractory bricks made by a slurry gelation and
foaming method[J]. J Eur Ceram Soc, 2013, 33(s15): 3429–3435.
[6] 朱劲松, 宋玉普. 灰色理论在混凝土疲劳强度预测中的应用[J]. 混
凝土, 2002(6): 10–12.
ZHU Jingsong, SONG Yupu. Concr (in Chinese), 2002(6): 10–12.
[7] 朱伯铨, 魏国平, 李享成. 基于图像分析技术的多孔隔热耐火材料
的气孔孔径分布特征[J]. 硅酸盐学报, 2012, 40(9): 1369–1375.
ZHU Boquan, WEI Guoping, LI Xiangcheng. J Chin Ceram Soc, 2012,
40(9): 1369–1375.
[8] SONG Y F, DENG C J, ZHU H X, et al. Pore forming mechanism of
forsterite insulation materials synthesized by molten salt method[J].
Key Eng Mater, 2016, 697: 134–137.
[9] 宋云飞, 邓承继, 祝洪喜, 等. 基于灰色系统理论的多孔镁橄榄石
材料气孔特性与耐压强度的相关性[J]. 硅酸盐学报, 2016, 44(6):
896–900.
SONG Yunfei, DENG Chengji, ZHU Hongxi, et al. J Chin Ceram Soc,
2016, 44(6): 896–900.
服务与反馈:
文章下载】【加入收藏
中国硅酸盐学会《硅酸盐学报》编辑室
京ICP备10016537号-2
京公网安备 11010802024188号
地址:北京市海淀区三里河路11号    邮政编码:100831
电话:010-57811253  57811254    
E-mail:jccs@ceramsoc.com