[1] HANG R Q, QI Y. A study of biotribological behavior of DLC coatings and its influence to human serum albumin[J]. Diam Relat Mater, 2010, 19(1): 62–66.
[2] WANG C J, GUO B, SHAN D B. Tribological behaviors of DLC film deposited on female die used in strip drawing[J]. J Mater Process Tech, 2013, 213(3): 323–329.
[3] LENKA K, RADIM K, TERRY C L. Advances in metals and alloys for joint replacement[J]. Prog Mater Sci, 2017, 88: 232–280.
[4] MOHSEN T A, NARGES S M, CHRISTOPH H. Metals for bone implants. Part 1. Powder metallurgy and implant rendering[J]. Acta Biomater, 2014, 10: 4058–4070.
[5] PETERS K, SCHMIDT H, UNGER R E. Cell type-specific aspects in biocompatibility testing: the intercellular contact in vitro as an indicator for endothelial cell compatibility[J]. Biomaterials, 2002, 23: 3413–3419.
[6] SOCHART D H. Relationship of acetabular wear to osteolysis and loosening in total hip arthroplasty[J]. Clin Orthop, 1999, 363: 135–150.
[7] SHI B, AJAYI O, Fenske G. Tribological performance of some alternative bearingmaterials for artificial joints[J]. Wear, 2003, 255: 1015–1021.
[8] ZHANG T F, XIE D, HUANG N, et al. The effect of hydrogen on the tribological behavior of diamond like carbon (DLC) coatings sliding against Al2O3 in water environment[J]. Surf Coat Technol, 2017, 320: 619–623.
[9] ADACHI S, ARAI T, KOBAYASHI K. Chemical treatment effect of Si (111) surfaces in F-based aqueous solutions[J]. J Appl Phys, 1996, 80: 5422–5426.
[10] OLIVER W C, PHARR G M. Measurement of hardness and elastic modulus by instrumented indentation: Advance in understanding and refinements to methodology[J]. J Mater Res, 2004, 19: 3–20.
[11] BERGER M, WIKLUND U, ERIKSSON M. The multilayer effect in abrasion-optimising the combination of hard and tough phases[J]. Surf Coat Technol, 1999, 116–119: 1138–1144.
[12] SCHNEIDER D, TUCKER M D. Non-destructive characterization and evaluation of thin films by laserinduced ultrasonic surface waves[J]. Thin Solid Film, 1996, 290/291: 305–311.
[13] BRUNO P, CICALA G, LOSACCO A M. Mechanical properties of PECVD hydrogenated amorphous carbon coatings via nanoindentation and nanoscratching techniques[J]. Surf Coat Technol, 2004, 180/181: 259–264.
[14] MISHRA S K, BHATTACHARYYA A S. Effect of substrate temperature on the adhesion properties of magnetron sputtered nano-composite Si–C–N hard thin films[J]. Mater Lett, 2008, 62: 398–402.
[15] YAO Z Q, YANG P, HUANG N. Studies of the composition, tribology and wetting behavior of silicon nitride films formed by pulsed reactive closed-field unbalanced magnetron sputtering[J]. Nucl Instrum Meth Phys Res, 2006, 242 (1/2): 33–36.
|